A partir del 30 de junio aproximadamente, todas las visitas a kemtron-emc.com y a los sitios web asociados se redireccionarán automáticamente a te.com. Agradecemos su paciencia y comprensión durante esta transición. Esperamos poder servirle en te.com.

RFI/EMI ventilation panels for electronic enclosures

11 enero 2023

RFI/EMI ventilation panels for electronic enclosures

Most electronic enclosures need some form of air ventilation to keep cool the electronics within. If this is a RFI/EMI shielded enclosure then the overall shielding effectiveness of the enclosure can be compromised.

For many commercial applications perforated sheet, metal or metallised plastic will suffice but for high performance requirements waveguides provide superior shielding over a wide frequency range. Waveguides can be circular, rectangular or honeycomb shaped. The principle is that of “Waveguide beyond cutoff”. The honeycomb vent is series of tubes that acts as a waveguide, guiding electromagnetic waves into or out of the enclosure, but as the tubes are long enough then it attenuates those waves. Typically the tube should be at least 3 times as long as the diameter. Good practice is 4 times. Therefore a 3.18mm cell should be 12.7mm long.

The most cost effective is aluminium honeycomb because it offers high shielding performance, light weight and good airflow as it is 96% open area. A typical shielded enclosure will use 2 honeycomb ventilation panels one as the inlet and one for the exhaust.

Aluminium honeycomb vents are supplied in an aluminium frame with an EMI gasket to ensure a good electrically conductive bond with the enclosure. Many frame styles are available to suite different mounting methods.

Learn more at www.te.com and on LinkedIn, Facebook, WeChat and Twitter.

  • © Kemtron Ltd 2024. Todos los derechos reservados